JVC TK-1280E - Page 24

SPECIFICATIONS
Type
Signal system
Pickup element
Pickup colour system
No. of effective pixels
Pickup area
Scanning lines
Scanning frequency
Syne system
Sync input
Video output
Video S/N ratio
Resolution
Minimum required
iltumination
22
Provided accessory
: Colour video camera head
: Based on PAL standard
: Interline-transfer system CCD solid-
state image sensor
(with complementary colour filter)
: Single CCD complementary colour
system
: 500 (H) x 582 (V)
:.4.8(H) x 3.6 (V) mm
: 625 lines, 2:1 interlaced
: (H) 15.625 kHz
(V) 50 Hz
: Internal, External, Line lock, H/V
lock
: Composite video signal (VBS)/
1 Vp-p, 75 ohms terminated
(or black burst signa! (BB))
: Composite video signal:
1 Vp-p, 75 ohms, unbalanced
: 46 dB (1000 Ix, AGC switch set to
“OFF”, at weighting)
: 330 TV lines (horizontal)
: 2 Ix (f/1.2, AGC switch set to “ON”)
: Iris plug (3-pin) x 1
Iris plug (4-pin) x 1
YIC plug (4 pin) x 1
e Design and specifications subject to change without notice.
® This colour video camera is designed to output video signals
conforming to the PAL standard, so that it cannot be used
with video recorders or colour monitors which use colour
systems other than PAL.
Dimensions (unit: mm)
Recommended
subject illumination
Switching functions
Adjusting functions
Lens mount
Power requirement
Power consumption
({max.)
Operating
temperature range
Operating humidity
Maximum external
dimensions
Weight:
> 2000 lux
: AGC (ON, OFF),
Shutter mode (NORM, 1/120,
1/125, 1/250, 1/500, 1/1000, 1/2000,
1/4000, 1/10000, AUTO),
White balance mode (MANU,
Automatic, halogen lamp),
BLC mode (ON, OFF),
sync mode (LL (H/V), I/E)
: Flange-back, manual white balance
(2 axes; G-Mg, R-B), V phase, H
phase, SC phase, IRIS LEVEL con-
trol
:‘C mount (with C-mount adapter)/
CS mount (without C-mount
adapter)
: DC 12 or AC 24V, 50 Hz
: 0,6A (DC 12V)
6,5 W (AC 24V)
: -10°C to +50°C
: Less than 90% Rh (noncondensing)
: Approx. 69(W) x 65(H) x 150(D)mm
(without lens mount cap)
Approx. 500 g
TK—1261
COLOR VIDEO CAMERA