JVC UX-A4 - SWITCHING THE POWER ON;OFF; COMPU PLAY

UX-A4 B/E/G/GI/EN
(Switcr nie eoeR OwOFE
POWER bution
TUNER/BAND button °
<1, > buttons
= TREBLE + ~ wee + =
Ee is 5 (=)
Play/pause button
Switching the power on/off Fah 5
®
Switching
on:
©
Switching
off:
\I- The indicator lights.
= The indicator goes out. rs
STANDBY
STANDGY
© The indicator in the display window lights. ° Ey Indicator in the display window goes out and only the clock is
indicated.
COMPU PLAY
Even
when
the
power
is
set
to
STANDBY,
pressing
the
button shown below switches on the power and selects the
source.
Function mode Operations
When
this
button
Is
pressed
with
a
CD
loaded,
CD
playback
begiris.
-
[x]
or
[>
)
TAPE
When
this
button
Is
pressed
with
a
tape
loaded,
tape
playbackbegins.
Teer
TUNER
When
this
button
Is
pressed,
the
tuner
is
engaged
When the CD door OPEN/CLOSE button (4) Is pressed,
the source sound does not switched over, the CD door can
open or close.
Notes:
1. When switching off the power, be sure to press the
power button.
2. The COMPU PLAY button on the remote control has the
same function as the UX-A4.
3. When the CD door opens and the Play/pause ({ > #3)
button is pressed, the CD door closes and the CD play
starts.
10 (No. 1890)