JVC UX-A4 - Reel and Actuator motor assembly; Leaf switch board

@
Reel
and
Actuator
motor
assembly
(Fig.
7-27,
7-28)
1.
2.
3.
—_
Remove four screws (23, 26) retaining the reel motor (21)
and the actuator motor assembly (24), (Fig. 7-27}
When removing the seel motor, unsolder the two points
(D) on the back side. (Fig. 7-28)
When
removing
the
actuator
motor,
unsolder
the
two
points
(E)
in
the
same
manner.
(Fig.
7-28)
Leaf switch board (Fig. 7-29)
. Remove a screw (39) retaining the leaf switch board from
the chassis basis.
. Expand five pawls (F to J) retaining the leaf switch board
in the direction of the arrow while removing the leaf switch
board.
gd :
or vN
- (Keb o J aoe
Leaf switch board re
| UX-A4 B/E/G/GI/EN
Fig. 7-28
(No. 1890) 37