JVC UX-C7

Example 2 = Ejemplo 2
oO W/CEAR 2 PROGRAM
® RR
4] 3 Disc No.
3 3S =
OED fur
he =I
i- U3
pres 2
EXTRA-CD operations
When 6 discs are loaded in the CD changer of this unit, use
this button to listen to the extra-CD.
cxraa ome Owen sto
Jses[ | 8:
Repeat playback
Press the REPEAT button before or during play. A single
tune or all tunes can be repeated.
© Repeat playback of a single tune ( @ )
The tune being played back will be heard repeatedly.
® Repeat playback of ail tunes ( <@} ALL)
When playing back an entire disc or programmed tunes,
all tunes or the programmed tunes will be heard
repeatedly.
UX-C7 B/E/G/GI/EN
To confirm the details of a program...
Press the PROGRAM button in stop mode: the tunes
making up the program will be displayed in programmed
order.
To clear the programmed tunes ...
Press the m™/CLEAR button before playing the disc. During
programmed playback, press this button twice. When the
CD tray is opened, the programmed tunes are cleared
automatically.
Notes:
1. Programming 21 or more tunes is impossible.
2. When a disc with 16 or more tunes is loaded, the
"OVER* indicator will appear.
3. When performing timer playback in the order of
27 ~—~«*"“Programmed play", do not press the P/#I button in the
above procedure.
@ Press the EXTRA button during CD mode and the CD
tray opens.
@ Load a disc and press the ~>/H button.
© Unload the disc after CD play has finished, by pressing
the 4 OPEN/CLOSE button. Then, press the EXTRA
button to switch back to CD changer mode.
Notes:
@ When the EXTRA-CD is loaded, the CD changer cannot
be used. When the DISC CONTROL button is pressed,
the CD tray opens and the display shows "PLEASE
TAKE", so unload the disc.
@ When an EXTRA-CD is loaded and the MEMO button is
pressed, "Ex" is displayed. However, the type of music
cannot be stored.
Random playback
Press the RANDOM button, all tunes on the disc are played
once, in random order.
Skip, Search and Programmed playback
Refer to the CD changer section for these operations.
(No. 1898) 15