17
Turning Off the Power
Automatically
To turn off the System after playback is over—
Auto Standby
This function works only when the source is CD.
When Auto Standby is in use, the A.STBY indicator lights
on the display.
When the disc playback stops, the A.STBY indicator starts
flashing.
If no disc operation is done for about 3 minutes while the
indicator is flashing, the System turns off (stands by)
automatically.
To turn off the System after a certain period of
time—Sleep Timer
1
Specify the time (in minutes).
2 Wait until the set time goes off.
To check the time remaining until the shut-off time
• If you press the button repeatedly, you can change the shut-
off time.
Remote
ONLY
A.STANDBY
(No indication)
A.STBY
Canceled
SLEEP
10 20 30 60 90 120
OFF
(Canceled)
SLEEP
To Next Page
Loading...
Need help?
General
