Why is the audio language wrong on my JVC Home Theater System?
Some DVDs are programmed to always use the original language initially. If this happens, press AUDIO on the remote control after starting play.
How to fix a JVC XV-THA85 that does not power on?
If the power does not come on, ensure that the power cord is correctly connected to both the center unit and a functioning AC outlet.
Why is there no picture on my TV screen from my JVC XV-THA85 Home Theater System?
If you're not seeing a picture on your TV screen, first ensure that the video cord is correctly connected. Then, verify that you've selected the correct input on your TV. Finally, confirm that the disc you are trying to play is a playable disc.
What to do if my JVC Home Theater System is not working correctly?
If the system isn't working correctly, it could be due to interference from lightning or electronic noise. Try switching the power off, then disconnect and reconnect the power plug. If the system was recently moved from a warm to a cold location, condensation might have formed inside. In this case, switch the power off and let the system sit for a few hours before turning it back on.
Why can't I play a disc on my JVC Home Theater System?
There are a few reasons why a disc might not play. First, check if the center unit’s and disc’s Region Code numbers are compatible; if not, replace the disc. Also, Parental Lock may be enabled; enter the password to change the Parental Lock level. If you are trying to play MP3 files, make sure that MP3 files have the file extension in their file names. If you are trying to play JPEG files, make sure that JPEG files have the correct file extension in their file names. If no MP3 or JPEG files are recorded to the disc, replace the disc.
Why can't I operate the MP3 control display on my JVC XV-THA85?
If the MP3 control display appears but no operation can be performed, it could be because no MP3 or JPEG files are recorded on the disc, or the disc is an unplayable type like a CD-ROM. Replace the disc with a playable one containing MP3 or JPEG files.
Why isn't One-Touch DVD Play working on my JVC XV-THA85?
If One-Touch DVD Play isn't working, even with the AV COMPU LINK cord connected correctly, the video output jack type to watch the DVD playback may not be set correctly. Ensure that “M. OUT” is properly set to watch the DVD playback.
Why does my JVC Home Theater System keep turning off by itself?
If the system suddenly turns off by itself, the Sleep Timer or Auto Standby function may be activated. Turn these functions off.
How to adjust the picture to fit the TV screen with my JVC Home Theater System?
If the picture doesn't fit the TV screen, ensure that the monitor type is set properly. Also, verify that the TV settings are correctly configured.
Why is there no sound from the center or surround speakers on my JVC XV-THA85?
If you're not getting any sound from the center and/or surround speakers, the speaker setting may be incorrect. Make sure to set the speaker setting properly.
General| Type | Home Theater System |
|---|---|
| Audio Channels | 5.1 |
| Total Power Output | 1000W |
| DVD Player | Yes |
| HDMI Outputs | 1 |
| Component Video Outputs | 1 |
| Coaxial Inputs | 1 |
| Surround Sound Formats | Dolby Digital, DTS |
| Progressive Scan | Yes |
| USB Port | Yes |
| FM Tuner | Yes |
| Bluetooth | No |
| Supported Formats | DVD, CD, MP3, WMA |
To Next Page
