Copyright © 2011 JVL Labs All Rights Reserved
13
18. Unscrew four Hex Nuts #8-32 to detach the Bill Acceptor from the Bill Acceptor bracket. Re-
place the old Bill Acceptor with the new one (see Fig. 29 on page 44 for details).
19. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Bill acceptor replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
To Next Page
Loading...