Copyright © 2011 JVL Labs All Rights Reserved
22
17. SERVICE LIGHTS PCB REPLACEMENT
1. Turn o the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Disconnect the Service Lights cable connector from the Service Lights PCB (see Fig. 51 on page
56 for details).
5. Unscrew two Machine Screws #4–40 x 3/16” and replace the old PCB with the new one
(see Fig. 52 on page 56 for details).
6. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Service lights PCB replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
To Next Page
Loading...