Copyright © 2011 JVL Labs All Rights Reserved
9
5. COIN MECHANISM REPLACEMENT
1. Turn o the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Lift the Coin Acceptor Lock upwards and tilt the Coin Acceptor towards you (see Fig. 15 on page
36 for details).
5. Unplug the Coin Acceptor (if electronically controlled) and remove it from the countertop
(see Fig. 16 on page 36 for details).
6. Replace the old Coin Acceptor with the new one.
7. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Coin mechanism replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
To Next Page
Loading...