Digital Photo Frame V10M10_IM_EN_08172007
www.jWIN.com
- 19 -
OPERATIONAL INSTRUCTIONS
Setup Mode-continued
3. Press the NAVIGATION [] button to choose the interval
time and press the ENTER button to confirm.
4. Press the NAVIGATION [] button to choose the Transition
Effect.
5. Press the NAVIGATION [] buttons to choose from
several options and press the ENTER button to confirm.
6. Press the NAVIGATION [] button to proceed to the next
Setup option menu.
The second setting option is the Auto Play setting.
1. Use the NAVIGATION [] button to choose Photo, Music.
2. Press the NAVIGATION [] button again for each option and
set ON or OFF.
3. Press ENTER to confirm.
Add：Press the NAVIGATION [] button to proceed to the next
Setup option menu.
The third setting option is the Display Setup setting.
1. Use the NAVIGATION [] button to choose between TFT
Brightness, TFT Contrast or TFT Saturation.
2. For TFT Brightness, TFT Contrast, and TFT Saturation use
the NAVIGATION [] button to display a range and press
the NAVIGATION [] buttons to select desired levels for
each option.
3. Press the ENTER button to confirm.
The fourth setting option is Custom Setup setting.
1. Use the NAVIGATION [] button to choose between OSD
Language, Style, Repeat Mode, Media, Default and Set Time
(Set the clock).
To Next Page
Loading...