Portable Audio CD Player V30M30_IM_EN_05272009
www.jWIN.com - 4 -
OPERATING INSTRUCTIONS
Intro Scan Play
1. Press the MODE button repeatedly in stop mode or during playback.
2. When “INTRO” appears in the display, press the PLAY / PAUSE XII
button.
• The first 10 seconds of each track beginning with track 1, and will be
played in order.
3. To cancel this function, press the MODE button repeatedly until
“INTRO” disappears.
Random Play
1. Press the MODE button repeatedly in stop mode or during playing,
2. When “RND” appears in the display, press the PLAY / PAUSE XII
button.
3. All tracks on the disc will be played in random order selected by CD
player,
4. When Random Play is complete the player will shut off automatically.
5. To cancel this function, press the MODE button repeatedly until “RND”
disappears.
MAINTENANCE
Notes on CDs
1. Before playing, clean the CD with a
cleaning cloth. Wipe the CD from the
center out to the ends.
2. Do not expose the CD to direct sunlight or heat sources such as hot air
ducts. Do not expose to direct sunlight, nor leave CDs in a car, as there
can be a considerable rise in temperature.
3. Do not stick paper or sticker on the CD. Do not scratch, dirt or
fingerprints on the CD, for it may cause tracking error.
Cleaning the Lens
If the lens becomes dirty, it may cause a skipping of sound during CD
operation. Clean with a commercially available lens cleaner.
Cleaning the Cabinet
Clean the cabinet, panel and controls with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type of abrasive pad,
scouring powder, or solvent, such as alcohol or benzine.
To Next Page
Loading...
Need help?
General
