10
Make sure to turn o the air purifier and disconnect power before cleaning.
Note: It is forbidden to directly rinse or spray the purifier
with water. Do not wipe the purifier with a soaking wet
cloth to prevent water from getting into it.
Cleaning the air purifier
To ensure your purifier works and purifies properly,
use a vacuum cleaner or soft cloth to remove any
dust clinging to Air inlets or housing walls.
Cleaning the laser particle sensor
Use a non-sharp tool to open the cover of the
laser particle sensor, then use an air blow gun
or hair dryer to clean the sensor and the filter
on the cover, as illustrated in the figure.
Note: Do not use hot air.
Care
&
Maintenance
To Next Page