EasyManua.ls Logo

JYOTI DHAMAN-III - User Manual

Default Icon
93 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DHAMAN-III Ventilator System
Operators Manual Version No: V.02.02.06.2021

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JYOTI DHAMAN-III and is the answer not in the manual?

JYOTI DHAMAN-III Specifications

General IconGeneral
BrandJYOTI
ModelDHAMAN-III
CategoryFan
LanguageEnglish

Summary

DHAMAN-III Ventilator System Operators Manual

Version Information

Displays the manual version number.

Chapter 1 - Introduction

Device Outline

Provides a visual overview of the DHAMAN-III ventilator system components.

Operator Safety Information

Details essential safety precautions and symbols for safe operation and handling.

General Warnings & Cautions

Lists critical warnings and cautions for operation, storage, and environment.

Chapter 2 - System Overview

System Components and User Interface

Identifies main components and describes the ventilator's control panel interface.

Patient Unit Configuration and Symbols

Details ports, connections, and explains device symbols and labels.

Transportation and Storage

Outlines procedures for safely moving, transporting, and storing the ventilator.

Chapter 3 - Setting up the Ventilator

Installing and Connecting Power Supply

Guides on ventilator placement and connecting it to an electrical power source.

Connecting Gas and Breathing Circuits

Explains connections for Oxygen/Air supply and the patient breathing circuit.

Specialized Circuits and Ports

Instructions for HFNT, Nebulizer circuits, and communication ports.

Chapter 4 - Operating Procedure

Initial Operation and Checks

Details powering on, functional checks, and patient selection for ventilation.

Setting Ventilation Parameters

Guides on entering patient data, selecting modes, control parameters, and alarm limits.

Starting, Stopping, and Powering Off

Procedures for initiating, discontinuing, and safely powering down the ventilator.

Chapter 5 - Ventilator Modes & Controls

Volume Controlled Modes

Explains VCV, VCV-SIMV, and PRVC modes, their parameters, and operation.

Pressure Controlled Modes

Details PCV, PCV-SIMV, and CPAP-PSV modes, focusing on pressure support.

Non-Invasive Modes and Special Functions

Covers HFNT, BIPAP ST modes and special functions like Nebulizer and Holds.

Chapter 6 - Monitoring

Numerical Patient Data

Displays real-time numerical monitoring parameters like PIP, PEEP, and Breath Rate.

Graphics Display

Shows real-time waveforms of pressure, flow, and volume for patient status analysis.

Chapter 7 - Alarm Handling

Alarm Introduction and Settings

Explains the alarm system, messages, and how to adjust alarm limits.

Alarm Messages and Causes

Lists common alarms, their occurrence, and probable causes for troubleshooting.

Chapter 8-Technical Specification

System Specifications and Parameters

Covers compliance, operating conditions, display, power, parameters, and alarms overview.

Service and Accessories

Information on device servicing, approved parts, and standard accessories.

Chapter 9 - Maintenance

Cleaning, Disinfection, and Sterilization

Procedures for maintaining hygiene and preventing infection through cleaning and sterilization.

Component Disassembly and Preventive Maintenance

Instructions for disassembling components and the schedule for regular preventive maintenance.

Chapter 10 - Definitions

Control, Alarm, and Display Parameters Definitions

Explains control, alarm, and display parameters, their ranges, and meanings.

Chapter 11 - Accessing Utility

Machine Info, Calibration, Logs, and Special Functions

Accessing device info, calibrations, logs, special keys, sound, and display configuration.

Chapter 12 - Warranty

Warranty Details, Contact, and Summary

Outlines warranty coverage, contact details, and a summary of the manual's content.