response function.
6) Screenshot key: Take screenshot and store.
7) TURBO key: First press and hold any key of the function keys (A/B/X/Y/L1/
R1/L2/R2) then press “TURBO” key once to repeat and accelerate action in
a game. Press “TURBO” key once again to cancel the repeating and accele-
rating function.
8) Reset key: Short press this key in “RESET” hole to disconnect controller from
console and reset the controller.
Connection instruction
1) Connecting to SWH Console via wireless
A.
Connecting to a SWH console for the first time:
Power on a SWH console, on the main interface of the console click (by
using your finger) “Controllers” → “Change Grip/order” to come to pairing
mode interface; press “HOME” key and hold for 4s to power a controller on,
four LEDs in the controller start blinking slowly and circularly then blinking
quickly and circularly after 4s, when one (or more) of the four LEDs is solid
bright, it means that the controller is paired with the console successfully;
press “B” key to return to the main interface of the console.
B.
Connecting to a paired SWH console:
If a controller was paired with a SWH console ever before, just press “HOME”
key shortly to power the controller on, the controller will be connected to the
console automatically again.
C.
Connecting controller back to SWH console:
a.
If a controller is in sleeping mode, press “HOME” key shortly to wake it up,
it will be connected to the console again automatically.
b.
If a SWH console is in sleeping mode, first press the power button of the
console to wake the console up then shortly press “HOME” key of the cont-
roller to connect it back to the console (If a SWH console is in sleeping
mode, the console can’t be woken up by directly pressing any key of the
controller.).
2) Connecting to SWH Console via USB cable
On the main interface of a SWH console, click “Settings” → “Controllers and
Sensors” → “Pro Controller Wired Communication” → “ON” to open Pro cont-
roller wired connection; connect a controller to the USB port of the console
holder through a USB cable, LED 4 in the controller starts blinking slowly then
LED 1 in the controller will be blinking slowly after the controller is connected
to the console.
3) Connecting to Windows PC via USB cable
First you need to download the X-360 driver and install it on your Windows
03
To Next Page
Loading...