17
Evaporating
residual water
With this function, any residual water in the ma-
chine is evaporated and removed as a prepara-
tion for transport or storage. Furthermore, this
prevents any residual water from freezing in the
machine when the machine is transported or
stored at temperatures below freezing point.
CAUTION
Extreme temperatures may cause dam-
age to the machine (permitted operat-
ing temperature 10°C - 45°C). For this reason
the machine
- must be protected against frost,
- must not be used at temperatures below 10°C,
- must not be used at temperatures over 45°C.
Procedure
• If necessary, warm up the machine until it
reaches room temperature.
• Open and close the lever in order to eject any
existing capsule.
• Take out and empty the water tank.
• Ensure that the machine is switched off.
WARNING
Risk of scalding! The evaporation pro-
cess results in hot steam (up to 120°C)
and hot water.
Do not reach under the spout and maintain a
safe distance from the spout.
• Depress the “small cup” and the milk/rinse
button at the same time. Now press the on/off
button. Evaporation starts and the “large cup”
button flashes green.
• After the evaporation process the machine
switches off automatically.
• Reinsert the empty water tank.
• Empty and dry the drip tray and spent capsule
container.
• Use a dry cloth to wipe the front of the hous-
ing.
To Next Page
