28
7
Reinsert the water filter again (optio-
nal). Fill the water tank with fresh water
and replace it in the appliance. Replace
the collecting container under the spout
again.
8
Press the rinsing button again to rinse
the appliance out with fresh water. The
end of the process is displayed when the
rinsing button blinks slowly.
9
Now press the rinsing button for at
least 3 seconds to quit the descaling pro-
gramme. After this, empty and clean the
collecting container.
10
To switch the appliance back to ope-
rating mode, press the ON/OFF button.
Please do not forget to replace the drip
tray under the spout again.
PROHIBITED
Do not drink the rinsing
fluid – health hazard.
min. 3 sec.
9
7
8
Descaling the appliance (continued)
To Next Page
Loading...
