K-FEE Wave - Start-up Procedure; Beverage Preparation and Customization; Preparing Beverages

8 9
Before starting up
the machine, check
the voltage on the
type plate (see underside of
machine).
Please read the safe-
ty instructions first.
Recommendations for
first startup: Press
the rinsing button 5
times to rinse the machine
thoroughly.
Start-up
5x
8 129
On
max
65
12
1110
87
43
Risk of scalding
Very hot water.
Preparing beverages
Stop the brewing pro-
cess by pressing any
button a second time.
Risk of scalding
Do not open the le-
ver during the brew-
ing process. Do not reach un-
der the spout.
The machine switches
off automatically if
it is not used within
5 minutes (p 18). If neces-
sary, press the on/off button
to reactivate the machine
and rinse (p 8) before brew-
ing new drinks.
Important: Only insert the
capsule after rinsing has fin-
ished.
86
32
max
90mm
1A
117
4
max
150mm
CB
min 3 s
Off
98
5
Rinse water tank
thoroughly with a
mild cleaning agent
before first use.