EasyManua.ls Logo

K-Star K1003 - Install the Ductwork

K-Star K1003
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Note: This range hood must be properly grounded. The unit should be installed by a qualified
electrician in accordance with all applicable national and local electrical codes.
The minimum hood distance above cooktop must not be less than 24’’. A maximum of 33” above
cooktop is highly recommended for best capture of cooking impurities. Distances over 33” are at the
installer and users discretion.
INSTALL THE DUCTWORK
NOTE: To reduce the risk of fire, use only metal
ductwork.
1. Decide where the ductwork will run between
the hood and the outside.
2. A straight, short duct run will allow the hood to
perform most efficiently.
3. Install the Aluminum Flex duct on the vent
towards hood location.