NONE-DUCTED RECIRCULATION FILTER INSTALLATION
1. Purchase a non-ducted recirculation filter from
your dealer.
2. Install the filter by rotating it onto the equipment
which is stands on two sides of the motor.
PREPARE THE HOOD
Note: On stainless steel hoods, carefully remove the
plastic protective film from all exterior surfaces of
the hood and decorative flues, prior to final
installation.
3. Pick out the hood from the carton.
4. Install the vent into the duct connector of the cooker
hood.
5. Fix the extensive pipe onto the vent.
To Next Page
Loading...
