09
Wolf Warrior X User Manual
10
Wolf Warrior X User Manual
Product components
How to use the product
WOLF WARRIOR X
Checking the components inside of the box
Top:Standard battery charger(2A),Standard tool,User manual, Labeling, Body (Lithium battery included)
Take out the scooter from box
Do not hold the handlebar only when lifting the product from
the box.
Please be careful that the fixing slide of the folding part
maybe damaged,and a safety accident such as a part of the
body maybe caught.
Therefore, when lifting the product, it is necessary to raise
the handlebar first,and then slowly lift the body(footrest)of
the product with both hands anddo not damage the folding
part.
Caution
Check whether the instrument screws are tightened
Make a note of the serial number
The serial number can be used to
check information such as date of
purchase, warranty period, etc.,
and product information can be
checked even if the product is lost
or stolen. (May vary depending on
branch office situation.)
1) Product folding
1. Raise the handle post(Steering tube) 2. Lock the folding parts
Release the locking clamp, raise the locking
slide upwards, raise the handle post, then
lower the locking slide downward.
Tighten the finishing screw properly to
lock the clamp ， so that the locking slide
is firmly fixed in any direction, and check
for looseness during use.
To Next Page
Loading...
