What to do if my Kabola HR burner will not start?
If the Kabola Boiler burner won't start, it could be due to an interrupted oil or power supply. First, bleed the oil filter, change the contaminated filter element, and fill the oil tank. If that doesn't work, check the fuses, the power supply, and the max thermostat at the dashboard.
Why does my Kabola HR Boiler burner keep pulsing?
If the Kabola Boiler burner starts pulsing, it could be due to several reasons: * Interrupted flue gas flow: Clear the chimney opening. * Dirty boiler: Clean the boiler. * Interrupted oil supply: Bleed the oil filter, replace the contaminated filter element and fill the oil tank. * Defective nozzle: Replace the nozzle.
General| Voltage | 230 V |
|---|---|
| Pump | Yes |
| Burner | Automatic |
| Flue Gas Temperature | 120-180°C |
| Efficiency | 90-93% |
Overview of Kabola HR/HRE heating boilers and their quality.
Details on intended uses for central heating, hot water, and hot air systems.
Explanation of how Kabola boilers heat water using an oil burner.
Information on finding key specifications on the boiler's type plate.
Requirements for warranty activation, including commissioning protocol.
Important warnings about potential dangers and user responsibilities.
Specific instructions for safe installation and operation of the boiler.
Measures to take before and during boiler transportation to prevent damage.
Procedure for storing the boiler for extended periods in a safe, dry place.
Instructions for correctly placing the boiler in a suitable environment.
Details on selecting a moisture-free space and ensuring proper ventilation.
Guidance on piping connections and expansion tank assembly for the heating system.
Instructions for installing the flue gas outlet, including length and bends.
Instructions for connecting the room thermostat and other electrical components.
Step-by-step guide to filling the heating system and bleeding the circulation pump.
Procedure for connecting oil hoses to the oil filter and venting the filter.
Detailed steps for starting the boiler system after connection and filling.
Referral to the room thermostat manual for detailed operation.
Explanation of the operating panel for the HR-CH model, including display readings.
Explanation of the operating panel for the HR-Calorifier model, including display codes.
Explanation of the operating panel for the HR-Combi model, including display codes.
Important considerations regarding replacement parts and ordering.
Detailed steps for annual cleaning of the boiler, burner, and flue.
To Next Page
