3
overview
GBS control is an improved GBS8200 RGB to VGA converter board, and an
alternative firmware for Tvia Trueview5725 based Upscaler / Video converter
board.
NOTE:
1) This device does not support composite and S-video inputs.
2) HDMI and VGA outputs will not work if connected at the same time. You will
only be allowed to have one connected at a time.
3) If you want to switch the video input signal (when you have more than one
input video source connected into this device), you need to power off the
device first to avoid potentially damaging the device.
FEATURES
1) Almost zero latency.
2) Supports most retro video game consoles.
3) Supports RGBS, RGSB, RGBS SCART, RGBHV, Component and VGA
Inputs.
4) Supports RGBS, VGA, Component and HDMI Outputs.
5) Supports high fidelity audio output.
6) Built in Si5351 stable clock generator.
7) Supports Video image adjustment.
8) Ability to balance the amplitude of the three primary colour signals - R, G, B.
9) Supports upscaling up to 1080p.
10) Supports downscaling to 240p/288p (Only through the Saturn AV
Connector).
11) No synchronization loss switching between 240p/480i, 480i/480p or
288p/576i.
12) Supported resolutions include:
(240p/288p/480i/480p/576i/576p/640p/720p/960p/1024p/1080i/1080p).
13) OLED Screen and WIFI web configuration pages help you make settings
To Next Page
Loading...