Need help?Do you have a question about the Kaisai OSK102 and is the answer not in the manual?
General safety advice and warnings for product use and installation.
Warnings related to the proper installation of the air conditioner unit.
Critical safety guidelines to follow during the operation of the air conditioner.
Safety precautions concerning the electrical components and power supply of the unit.
Safety instructions for cleaning and performing maintenance on the air conditioner.
Important cautions to observe to prevent damage or injury.
Identification of the different components of the indoor and outdoor units.
Details on the technical specifications and operational features of the unit.
Guidelines for operating the unit within specific temperature ranges for best results.
Explains additional functionalities like Auto-Restart and Wireless Control.
Instructions on how to adjust the vertical louvers for airflow direction.
Guidance on manually adjusting the horizontal louvers for airflow direction.
Important notes regarding louver positioning to prevent condensation and ensure performance.
Description of the sleep function for energy saving during nighttime use.
Procedure for operating the unit manually when the remote is unavailable.
Warning regarding the limited use of the manual operation function.
Step-by-step guide for cleaning the interior parts of the air conditioner.
Instructions on how to remove, clean, and re-install the air filters.
Information about the air filter cleaning and replacement notification system.
Recommended maintenance steps when the unit will not be used for an extended period.
Checks and maintenance procedures before starting or resuming regular use.
Critical safety measures to take before attempting any troubleshooting.
Common problems and their possible causes and solutions.
Diagnosing and resolving issues related to the unit's cooling efficiency.
Troubleshooting steps for when the air conditioner fails to turn on or operate.
Environmental considerations and proper disposal methods for the appliance.
Identification of the remote control model number.
Specifies the voltage required for the remote control operation.
Indicates the maximum distance for effective signal transmission.
Specifies the operational temperature and humidity range for the remote.
Button to turn the air conditioner unit on or off.
Button to cycle through different operating modes (Auto, Cool, Dry, Heat, Fan).
Button to adjust the fan speed to different levels.
Buttons to increase or decrease the set temperature.
Sets a timer for the unit to automatically turn on.
Sets a timer for the unit to automatically turn off.
Activates the sleep mode for energy saving during rest.
Engages the turbo mode for rapid cooling or heating.
Controls the automatic movement of the louvers for airflow direction.
Activates silence mode or 8°C heating feature.
Initiates the self-cleaning cycle for the indoor unit.
Enables temperature sensing at the remote's location for optimized comfort.
Instructions for installing and replacing batteries in the remote control.
Recommendations for optimal battery performance and storage.
Shows the currently selected operating mode of the air conditioner.
Indicates the currently set fan speed.
Displays the set temperature or timer information.
Indicates whether the unit is currently turned on or off.
Shows when the timer ON function is active.
Shows when the timer OFF function is active.
Indicates when the sleep function is activated.
Indicates when the FOLLOW ME function is active.
Steps to adjust the desired operating temperature for the unit.
How to set the unit to automatically select the operating mode.
Instructions for operating the unit in cooling mode.
How to use the unit for dehumidification.
Instructions for operating the unit with fan-only mode.
Steps for operating the unit in heating mode.
Detailed guide for setting the timer to automatically turn the unit on.
Detailed guide for setting the timer to automatically turn the unit off.
Instructions for configuring both ON and OFF timers concurrently.
Using the turbo mode for faster temperature adjustment.
How to activate the self-cleaning cycle to maintain the unit.
Using the follow me feature for remote temperature sensing.
Activating the silence mode for quiet operation or the 8°C heating feature.
Controlling the auto swing feature of the louvers.
Explanation of the sleep function for energy saving.
Identifies the specific model of the Smart AC Kit.
Specifies the wireless communication standard used by the kit.
Specifies the range of ambient temperatures for operation.
Indicates the acceptable range of operating humidity.
Details the required power input for the smart kit.
Lists the compatible operating systems for the mobile application.
Recommended security settings for wireless network encryption.
QR code for downloading the Nethome Plus app on Android devices.
QR code for downloading the Nethome Plus app on iOS devices.
Step to prepare the smart kit by removing its protective cover.
Instructions for physically installing the smart kit into the air conditioner unit.
Prerequisite for user registration, requiring a stable Wi-Fi connection.
Advice on activating the account via email for password recovery.
Warnings and important notes regarding network configuration steps.
Helpful reminders for a smooth network setup process.
Step-by-step guide for configuring the network using an Android device.
Step-by-step guide for configuring the network using an iOS device.
Essential requirement for app control, ensuring internet connectivity for both devices.
Instructions for logging into the mobile application using user credentials.
How to select the specific air conditioner within the app to access its controls.
Using the app to schedule the unit's ON and OFF times weekly.
Utilizing the 8°C heating function for frost protection of furniture.
General| Brand | Kaisai |
|---|---|
| Model | OSK102 |
| Category | Air Conditioner |
| Language | English |
To Next Page