Refer to the icon on the Rotor Blade to determine which direction to
tighten the blade in. Rotor Blades should be tightened by hand only.
[WARNING] Never use the Rotor Blade Removal Tool to tighten the
blades. The Blades are self-tightening and do not require much force
to install. Over-tightening may damage the thread and cause instability
during flight.
Removal
Please use the included Rotor Blade Removal Tool to detach the
blades. Fit the Rotor Blade Removal Tool into the motor housing to stop
unnecessary movement and then simply unscrew the Rotor Blade in the
OPPOSITE direction to the icon on the blade.
To Next Page
