ELECTRONIC CLOCK TIMER OF THE
OVENS Belle Époque
Setting the clock
To set the current day time:
• Press the rotary switch 1 four times to get
the lighting symbol 2.
• Turn the rotary switch 1 clockwise or
counter clockwise.
Electronical countdown timer
The countdown timer can be used even when the
oven is switched off.
To switch on the countdown timer
• Press the rotary switch 1 three times to get
the lighting symbol countdown timer
3.
• Turn the rotary switch 1
counter clockwise.
• To finish, press the rotary switch 1 again.
After the end of the opposed duration a tone
sounds and the symbol countdown timer 3
flashes.
To switch off the alarm tone:
• Press the rotary switch 1.
The symbol countdown timer 3 goes out.
To cancel the program set, press the rotary switch
1 for a few seconds,
signal. The related symbols go out.
Important! If you change the time setting,
you reset the timer and cancel former set
programs.