Kaiser Avantgarde PLUS - Page 36

36
EN
Setting the end of cooking time
The oven must switch off after the set end time.
Before setting the end of cooking time you have to
set the oven operating function
and the
temperature (see chapter «Multifunction oven
control»).
• Press the rotary switch 1 two times to get
the lighting symbol 2.
• Turn the rotary switch 1 clockwise or
counter clockwise.
• To finish, press the rotary switch 1 again
or wait 10 seconds.
After the set end time is reached, a tone sounds,
the symbol 2 flashes, and the oven switches itself
off.
• Set the oven operating function and
the temperature in the position 0.
To switch off the alarm tone:
• Press the rotary switch 1.
The symbol 2 goes out.
To cancel the program set, press the rotary switch
1 for a few seconds,
up to a confirming sound
signal. The related symbols go out.
1
Important! You should set a time which
differs from the current day time.
2