Kaiser Avantgarde PLUS - Page 40

40
EN
DIGITAL CLOCK TIMER* OF THE OVENS
Avantgarde
PLUS
Setting the clock
To set the current day time
• Press key 1 and 2 at the same time.
With this setting a flashing dot 3 appears showing
you are in clock setting mode.
• By pressing the electoral keys 4 (
– or + )
you can set the time.
After a few seconds the controller sets the time
currently displayed and the two dots stop flashing.
* - if available
Important! If you change the time setting,
you reset the timer and cancel former set
programs.
3
1
2
4