Kaiser X500 - General Settings; Usb Mode

Control
Adjust microphone, speaker and brightness
levels.
Sounds
Control / Toggle sounds produced by the X500
ON / OFF. Shutter, Boot-up and Beep can be
toggled.
LDC
Lens Distortion Correction. Allows you to toggle
Distortion Correction ON / OFF.
FOV
Adjust the X500’s eld of view. Select Super
Wide/Wide/Medium/Narrow eld of view.
GENERAL SETTINGS GENERAL SETTINGS
01 - ENG 01 - ENG
Power Frequency
Default setting is 50hz. However, if you
experience any light strobing in your footage
you may manually select 50/60hz.
WiFi
Toggle WiFi ON / OFF.
Date & Time
Set the correct date and time.
Screensaver
This setting lets you conserve power while
shooting. Toggle if/how long until the
screensaver comes on.
Select 1/3/5 minutes.
Auto Power O
This will power the camera o after a selected
period of inactivity.
Select 1/3/5 minutes.
Quick Record
Quick Record enables the ability to record
automatically when the camera is turned on.
USB Mode
You can choose between MSDC or Webcam
mode. In MSDC mode, you can access the les
on the SD card.
You can use X500 as a webcam as well. Please
note that the application you use on your
computer has to be compatible to this mode.
Reset WiFi Settings
This will allow you to reset your Wi-Fi settings
to default. Use this option if you have any
issues connecting with smartphone.
Language
Select your desired language here.
English French
German Spanish
Italian Chinese
Traditional Chinese Simplied Chinese