Do you have a question about the Kaito Voyager V2 and is the answer not in the manual?
FM Band | 87MHz - 108MHz |
---|---|
AM Band | 520kHz - 1710kHz |
SW Band | 7.0MHz - 18.0MHz |
Weather Band | CH1 - CH7 |
Noise Limit Sensitivity FM | ≥ 5μV |
---|---|
Noise Limit Sensitivity AM | ≥ 2.5mV/m |
Noise Limit Sensitivity SW | ≥ 50μV |
Signal Selection | ≥ 40dB |
Max Output Power | About 100mW |
---|---|
Max Volume Output Current | About 120mA |
Power Source | Rechareable Ni-MH Batteries 3.6V|600mAh |
Optional Batteries | AAA Batteries 1.5V x 3 |
Mini-USB Port DC-in | 5V |
Max Output Current (Dynamo) | 300mA |
Speaker Diameter | Φ2 inches |
---|---|
Earphone Jack Diameter | Φ3.5mm |
Dimensions | 5¼ x 2½ x 1¾ inches |
---|---|
Weight | 9 oz |
Instructions for using the built-in rechargeable Ni-MH batteries compartment.
Instructions for using the optional AAA batteries compartment.
Guide on how to use the solar panel to charge the radio.
Instructions on how to operate the flashlight function.
Details on generating power by cranking the dynamo.
Instructions for charging using an external AC adapter.
Guidance on charging the radio via a computer's USB port.
How to charge external devices like cellphones using the radio's USB out port.
Instructions for activating the SOS red flash alert.
Instructions for activating the siren alarm.
Important safety and usage precautions before operating the radio.
Technical details and specifications of the Voyager V2 radio.