KAKA Industrial RM-12 User Manual

Operation Manual RM-12/18
KAKA Industrial
®
— 1 —
Unpacking
The Rotary Machine is shipped from
the manufacturer in a carefully packed
Carton box. Thoroughly inspect the
product upon opening the package.
After unpacking the unit, carefully
inspect for any damage that may
have occurred during transit. Check
for loose, missing, or damaged parts.
Shipping damage claims must be
filed with the carrier and are the
responsibility of the user.
Specications
KAKA Rotary Machine is hand
operated and will form (0.050) mild
steel (or equivalent). The rotary
machine is constructed of steel
ensuring minimum deflection of the
workpiece during forming operations.
Six die sets are included allowing the
following operations to be performed:
Beading (R4,R6,and R7.5) and
anging(1/16”,1/8”and 1/4”)
Stock No. ................................173226
Model........................................RM-12
Capacity....................18 Ga. (1.2 mm)
Throat depth..................12" (305 mm)
Packing size....15"x18"x6" (38x45x16 cm)
N.W./G.W. ..........42/46 lbs (19/21 kg)
Stock No. ................................173206
Model........................................RM-18
Capacity....................18 Ga. (1.2 mm)
Throat depth..................18" (457 mm)
Packing size....29"x11"x6" (73x27x14 cm)
N.W./G.W. ..........53/57 lbs (24/26 kg)
Important
Rotary machine and dies are coated
with a protectant. To ensure proper fit
and operation, remove coating. Coating
is easily removed with mild solvents,
such as mineral spirits, and soft cloth.
Avoid getting cleaning solution on
paint or any of the rubber or plastic
parts. Solvents may deteriorate these
nishes. Use soap and water on paint,
plastic or rubber components. After
cleaning, cover all exposed surfaces
with a light coating of oil.
WARNING
Never use highly volatile solvents.
Non-ammable solvents are recommended
to avoid possible re hazard.
SAVE THESE INSTRUCTIONS
Thank you for purchasing our RM-18
Rotary Machine. Before attempting
to operate your new tool please
read these instructions thoroughly.
You will need these instructions for
the safety warnings, precautions,
assembly, operation, maintenance
procedures, parts list and diagrams.
Keep your invoice number with these
instructions. Write the invoice number
on the inside of front cover. Keep the
instructions and invoice in a safe, dry
place for future reference.

KAKA Industrial RM-12 Specifications

General

Brand	KAKA Industrial
Model	RM-12
Category	Tools
Language	English

Summary

Unpacking Instructions

Product Specifications

Important Information

General Safety Information

Safety Rules

Wear proper apparel, keep work area clean, and be alert. Follow safety precautions.

Know How to Use Tool

Use the right tool, keep hands clear of dies, and do not exceed machine capacity.

Assembly and Installation

Mount Handle to Machine

Attach the handle assembly to the driving and driven shafts using the provided screw.

Operation Guide

Maintenance and Lubrication

Lubrication Procedures

Coat exposed surfaces with oil and grease shafts monthly to prevent rust and ensure smooth operation.

Troubleshooting

Machine Drawing

Parts List

Service Record

Contact Information