kala Arkane 1650 - Installing the Machine; Select the location where the machine should be installed; Unpacking the machine

4
1. INSTALLING THE MACHINE
:
1.1. Select the location where the machine should be installed
Before unpacking your laminating machine, select the space where the machine should be installed
so that you can easily access all parts of the machine and have enough free space around the
machine.
1.2. Unpacking the machine
Remove the lid on top of the cardboard.
Tear off the cardboard
end and remove it
X4
X4
X1
Unscrew the 4 screws
at each bracket and
remove the 4
brackets.
Unscrew the wooden
ramp and place it on
the smaller edge o
f
the pallet.