Kalamazoo Clausing HBS-1018

Need help?

Do you have a question about the Kalamazoo Clausing HBS-1018 and is the answer not in the manual?

Summary

7-inch Wet Cutting Bandsaw

Model 7 AW Features

Details features like blade guide, speed settings, coolant system, chip removal brushes, and gearbox.

7 AW Cutting Capacity

Specifies the round and rectangular cutting capacities at 90° and 45° angles.

10-inch Wet Cutting Bandsaw

Model HBS-1018 Features

Lists features including quick positioning vise, stock stop, blade speeds, carbide guides, coolant, and hydraulic control.

HBS-1018 Cutting Capacity

Outlines the cutting capacities for round and rectangular stock at 90° and 45° angles.

9-inch and 13-inch Wet Cutting Bandsaws

Models H9 AW & 13 AW Specifications

Covers variable speed drive, blade installation, chip removal brush, gearbox, gravity feed, and swivel vise.

H9 AW;13 AW Cutting Capacity

Details cutting capacities for round and rectangular materials at 90° and 45°.

9-inch and 13-inch Wet Cutting Semi-Automatic Bandsaws

Models H9 AWSA & 13 AWSA Features

Includes standard H9AW/13AW features plus hydraulic head lift and automatic hydraulic vise.

H9 AWSA;13 AWSA Cutting Capacity

Provides cutting capacities for round and rectangular stock at 90° and 45°.

16-inch and 18-inch Wet Cutting Semi-Automatic Bandsaws

Models BS400 SA & BS450 SA Features

Highlights hydraulic feed, variable speed drive, blade tension, coolant, hydraulic vise, and safety features.

BS400 SA;BS450 SA Cutting Capacity

Specifies cutting capacities for round and rectangular materials for both models.

12-inch Wet Cutting Automatic Bandsaw

Model KC12 AX Features

Details automatic/semi-automatic operation, variable speed, LED readout, hydraulic down feed, and auto shutoff.

KC12 AX Cutting Capacity

Lists round and rectangular cutting capacities, and optional bundle cutting dimensions.

9-inch Wet Cutting Automatic Bandsaw

Model AH9 AW KALAMATIC Features

Describes setup ease, variable speed drive, blade installation, chip removal brush, cast iron bed, and warranty.

AH9 AW Cutting Capacity

Specifies capacities for round tubing, round solid, rectangular tubing, and flat solids.

12-inch Wet Cutting Semi-Automatic Miter Bandsaw

Model MS1218 VS Features

Highlights miter cuts, variable speed, coolant, carbide guides, quick position vise, automatic shut-off, and head feed.

MS1218 VS Cutting Capacity

Details 90° and 45° cutting capacities for round, square, and rectangular stock.