Model 7AW
7" Wet Cutting
Bandsaw
Equipped with 3/4 hp,
115v single phase
drive motor
Shown with optional
K-108 caster kit
Model HBS-1018
10" Wet Cutting
Bandsaw
Equipped with 2 hp,
115v/220v 1ph
or 230v/460v 3ph
drive motor
• Perm-Adjust blade guide
• Quick and easy blade installation front top of machine
• 3 blade speeds: 50-90-155 fpm
• Coolant system
• Stationary dual brushes for chip removal
• Enclosed gear box with gears in an oil bath
• Gravity feed head controlled by counterbalance
spring working with a hydraulic cylinder to insure
constant feed pressure on the blade
• Cutting capacity:
90° 45°
Round 7" 5"
Rectangular 6" x 8" 5" x 7"
• Quick positioning 45° vise • Stock stop
• 4 blade speeds:80-200-300-430 fpm
• Quick and simple speed change
• 1" wide blade and blade cleaning brush
• Solid carbide blade guides with rollers
• Coolant application through both guides
• Cast iron 22" high bed
• Totally enclosed transmission
• Hydraulic cylinder head control operated by needle valve
• Cutting capacity:
90° 45°
Round 10" 8"
Rectangular 18" x 6" or 10" x 16" 7" x 10"
To Next Page
