Need help?Do you have a question about the KALI AUDIO IN-8 and is the answer not in the manual?
General| Type | Studio Monitor |
|---|---|
| Configuration | 3-way |
| Frequency Response | 37 Hz - 25 kHz |
| Power Output | 140W |
| LF Driver | 8-inch woofer |
| MF Driver | 4-inch midrange |
| HF Driver | 1-inch tweeter |
| Inputs | XLR, TRS, RCA |
| Frequency Range (±3 dB) | 45 Hz - 21 kHz |
| Amplifier Power (LF) | 60W |
| Amplifier Power (MF) | 40W |
| Amplifier Power (HF) | 40W |
| Connectors | XLR, TRS, RCA |
| HF Trim | ±2 dB |
| LF Trim | ±2 dB |
| Recommended Listening Distance | 2.8 meters |
| Input Impedance | 10 kΩ |
Explains the coincident placement of mid-range and tweeter drivers for improved sound imaging.
Details the monitor's continuous output, dynamic headroom, and limiter circuit.
Describes the design of the port tube to minimize air noise for cleaner bass response.
Explains EQ settings to compensate for low-frequency interactions with room surfaces.
Explains how dip switches control Boundary EQ, LF/HF Trim, and RCA input power.
Details RCA, XLR, and TRS input types and their usage.
Instructions for volume adjustment, power input, and the on/off switch.
Details dip switch settings for compensating low-frequency interactions with room surfaces.
Adjusts low-frequency response by +/- 2 dB.
Adjusts high-frequency response by +/- 2 dB.
Enables or disables the RCA input.
Guides users through checking power, volume, and connections.
Addresses issues of playing too loud or other causes of distortion.
Troubleshoots noise issues related to RCA connections or nearby electronics.
Provides steps to determine if the issue lies with the speaker or signal path.
Lists specific cases and damages not included in the warranty coverage.
To Next Page
