EasyManua.ls Logo

Kalkhoff Pedelec Bosch Integrale 0.5 - Pre-Ride Inspection Checklist

Kalkhoff Pedelec Bosch Integrale 0.5
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Supplementary guide | Pedelec Bosch Integrale 0.5 EN-29
5. Tips
5.1 Safety information
DANGER
Do not allow yourself to be distracted by the display on the display
element. If you do not fully concentrate on the trac, you risk being
involved in a serious accident or fall with fatal consequences.
WARNING
Donotattemptanymodicationstothedrive.Forexample,itis
notpermittedtoraisethecut-ospeedabove20mph.Pedelecs
with modied drive power may no longer comply with the legal
requirements of the relevant country. You may be liable to prosecution
if you ride on public roads with a “tuned” Pedelec. There is also a risk
of a technical failure. Modied bikes of this type are excluded from
the warranty and guarantee.
Always remove the battery before starting to work on the Pedelec. Ac-
cidental activation of the
button may lead to severe injuries.
Checklist
Type Characteristics
Frame / forks Check the frame and forks for visible warping, cracks and
damage.
Handlebars / front stem Check they are seated securely.
Check that the bell is working and attached correctly and
securely.
Wheels Check the condition (damage, foreign bodies), concentricity and
pressures of the tyres.
The maximum permissible pressure is marked on
the side of a tyre in bar and psi (pounds per square
inch). Tyres should not be inated above or below this
pressure.
Check the valves are seated securely.
Visually inspect the rims for damage and wear.
Check that the through-axle is attached correctly and securely.
Chain Check the chain, pinions and sprockets for wear and damage.
Brakes Check that the brake system (including brake levers) is working
and attached correctly and securely.
Visual inspection of the brake pads/disks.
Lights Check that the light system is adjusted and in working
condition.
Check that reectors are axed in accordance with applicable
national trac regulations.
Threaded joints Check that all threaded joints are tightened as specied.
Luggage Check it is attached securely.
Battery Check it is attached securely.

Related product manuals