How to fix Kalorik HUVI RVC 50229 BK (HUVI) not charging?
If your Kalorik Vacuum Cleaner (HUVI) is not charging, ensure that it is switched on. Also, check that the charging contacts on HUVI are properly connected to the pins on the charging base. If the battery is discharged, reactivate it by switching HUVI on, placing it on the charging station for 3 minutes, removing it, and repeating this process three times before charging normally.
Why Kalorik HUVI RVC 50229 BK Vacuum Cleaner (HUVI) does not clean at the scheduled time?
If your Kalorik Vacuum Cleaner (HUVI) does not clean at the scheduled time, first ensure that the schedule function hasn't been cancelled by checking the HUVI app to schedule specific cleaning times. Also, make sure HUVI is switched on and connected to the charging station with a fully charged battery before operating. This behavior is normal if HUVI has finished the scheduled cleaning. Finally, check if the roller brush or suction intake is blocked; if so, turn off HUVI, clean the dust bin, roller brush, side brushes, and suction intake.
What to do if Kalorik HUVI RVC 50229 BK (HUVI) gets stuck while running?
If your Kalorik Vacuum Cleaner (HUVI) gets stuck while running and stops operating, it may be obstructed by cords, curtains, or carpet fringes on the floor. HUVI will attempt to free itself. If it remains stuck, manually remove the obstacles and restart the device.
Why Kalorik HUVI RVC 50229 BK Vacuum Cleaner (HUVI) is not able to connect to WiFi?
If your Kalorik Vacuum Cleaner (HUVI) is not able to connect to your home WiFi network, ensure that you are entering the correct WiFi username and password. Also, verify that HUVI is within range of the WiFi signal. Refer to the CONNECTING TO THE HUVI APP section for connection instructions and make sure the HUVI’s indicator is flashing when connecting through the app and that you are connecting to the 2.4 GHz signal.
Why Kalorik HUVI RVC 50229 BK Vacuum Cleaner (HUVI) does not clean the entire area?
If your Kalorik Vacuum Cleaner (HUVI) does not clean the entire area, it may be due to obstructions on the floor blocking HUVI's path. Remove any obstructions and small objects from the area before HUVI starts cleaning.
Why Kalorik HUVI RVC 50229 BK Vacuum Cleaner (HUVI) returns to base before cleaning is complete?
If your Kalorik Vacuum Cleaner (HUVI) returns to the charging base before it has finished cleaning, it is either because the battery is low and HUVI is automatically returning to recharge, or because the working time varies depending on the floor surface, room complexity, and cleaning mode selected. Both of these behaviors are normal, and no action is needed.
General| Brand | Kalorik |
|---|---|
| Model | HUVI RVC 50229 BK |
| Category | Vacuum Cleaner |
| Language | English |
Explains how to turn the device on/off and its standby/running states.
Details how to send the robot to recharge or connect to Wi-Fi.
Details the H13 medical-grade HEPA filter and its filtration efficiency.
Instructions for connecting HUVI via Bluetooth, the recommended method.
How to use the physical buttons on HUVI for cleaning and recharging.
Step-by-step instructions for removing and cleaning the dust bin.
Procedures for cleaning the HEPA and copper filters.
Instructions for cleaning the main roller brush and suction area.
Steps for safely removing and replacing the robot's battery.
To Next Page
