Need help?Do you have a question about the kaltis AV 073 M and is the answer not in the manual?
Explains hazard warning and caution symbols and their implications for safe operation.
Details electrical housing label and general safety rules for product use, grounding, and outdoor operation.
Provides guidelines for unit installation, location, and environmental considerations.
Details correct procedures for defrosting, managing frost, and using the access port.
Advises on optimal operating temperatures and environmental conditions for the unit.
Guides on properly loading pre-frozen materials and setting initial temperature points.
Instructions for unpacking the unit and checking the exterior for any signs of damage.
Warns against discarding internal lids for chest freezers for operational efficiency.
Details requirements for unit placement, clearance, and avoiding heat sources.
Highlights critical warnings about installation location, flammability, and water exposure.
Provides instructions for correct power connection, grounding, and avoiding modifications.
Explains how to level both chest and upright freezer models for stability.
Details the procedure for opening and closing the door on upright freezer models.
Introduces the Prime Series control panel and its main components.
Explains the function of various control keys on the Prime series panel.
Describes the meaning of different indicator lights on the Prime series control panel.
Details further indicator lights for temperature, door status, compressor, and power failures.
Explains indicators related to fuse, voltage, and optional backup system status.
Explains the function of various control keys on the Merit series panel.
Describes the meaning of different indicator lights on the Merit series control panel.
Guides on connecting the freezer to power and activating the control panel.
Details the process for adjusting and confirming the desired cabinet temperature.
Explains how to configure warm and cold alarm thresholds.
Describes how to silence an active alarm and its auto-reset behavior.
Outlines the procedure for testing the freezer's alarm system functionality.
Explains the location and function of the remote alarm output terminal.
Details the steps for cleaning the condenser unit and filter.
Advises on periodically checking door/lid gaskets for damage and signs of leaks.
Provides step-by-step instructions for defrosting the freezer interior.
Lists common causes and solutions for cooling failures and poor cooling performance.
Identifies potential causes for unusual noise during operation and start-up.
Lists and explains various alarm codes for Prime and Merit series freezers.
Details configuring input settings for the GSM remote alarm system.
Details configuring output settings for the GSM remote alarm system.
Guides on entering mobile phone numbers for the GSM remote alarm.
Explains setting the ringing period and how to close the alarm.
Details configuring relay settings and saving the GSM alarm configuration.
Lists and explains activation codes for setting up the remote phone alarm.
Provides guidance on recording freezer location and general setup notes.
Details how to test the remote phone alarm and connect it to the freezer.
Guides on connecting the CO2 cylinder and turning on the back-up system.
Details how to access the advanced settings menu via the controller.
Explains how to enable the back-up system and its alarm settings.
To Next Page
General