KAM DMX Star Cluster 3D

To Next Page

www.kam.co.uk

Due to continuous product development, specifications and appearance are subject to change.

If this product is ever no longer functional please it take to a recycling plant for environmentally friendly disposal.

I N S T R U C T I O N M A N U A L

DMX Star Cluster 3D

Three dimensional DMX laser effect

The ultimate Star Cluster! 3D version of the best selling laser effect

Multiple 100mW red and 40mW green laser points

Three dimensional laser effect to create endless show creation possibilities

Built-in high speed stepping motor

High-efficiency optical system

Sound-to-light sensitivity control with animated patterns

5 channel DMX operation / XLR DMX in and out

10 point dip switches

Tough all metal chassis with adjustable hanging bracket

Key operated power control

Rated voltage: 220-240V AC / Rated frequency: 50/60Hz

Laser wavelength: 100mW/650nm | 400mW/532nm

M A N U A L R E V I S I O N 1 . 0

Need help?

Do you have a question about the KAM DMX Star Cluster 3D and is the answer not in the manual?

Summary

Product Introduction and Safety

DMX Star Cluster 3 D Overview

Three dimensional DMX laser effect with key features.

Introduction and Warnings

Guidance for use, safety warnings, and laser radiation precautions.

Product Features and Specifications

Detailed list of laser, motor, optical system, and power specifications.

Unpacking and Packing List

Instructions for inspecting the product upon arrival and its contents.

Operating Instructions and Controls

Rear Panel Functions

Identification of all ports and controls on the rear panel.

LED Display Modes

Explanation of the different modes indicated on the LED display.

Dip Switch Settings

Configuration options for various operating modes using dip switches.

Sound Activation Mode Setup

Procedure for setting up and adjusting sound-activated effects.

Advanced Operation Modes

DMX 512 Modes

Details on DMX connectivity, addressing, and channel control.

Master Slave Mode Configuration

Instructions for linking multiple units in a synchronized Master/Slave setup.