Green DMX laser with remote control
Part of the Kam iLink laser series
Stepping motor
Full remote control
Full DMX512 operation
8 DMX channels
Auto mode / Sound-to-Light via built-in mic
Master/Slave modes
LED display
Tough metal chassis / Adjustable metal hanging bracket / Safety chain loop
Safety key On/Off lock
Mains fused IEC
For the latest instruction manual updates and information on the entire Kam range visit:
www.kam.co.uk
Kam products are manufactured by: Lamba plc, Unit 1, Southfields Road, Dunstable, Bedfordshire, United Kingdom LU6 3EJ
Telephone: (+44) (0)1582 690600 • Fax: (+44) (0)1582 690400 • Email: mail@lambaplc.com • Web: www.lambaplc.com
If this product is ever no longer functional please take it to a recycling plant for environmentally friendly disposal.
Due to continuous product development, specifications and appearance are subject to change.
© Copyright Lamba plc 2012. E&OE.
To Next Page
Need help?
General
