KAM DMX STAR CLUSTER - User Manual

To Next Page

instruction manual

www.kam.co.uk

Maintenance

It is very important to keep the DMX CLUSTER laser light clean, therefore

please keep the reflector lens clean. We suggest that clean the light

with professional glass cleaning lotion and a soft cloth.

Due to continuous product development, specifications

and appearance are subject to change. E&O E.

LASER DMX STAR CLUSTER

Cluster_manual 24/10/07 09:11 Page 1

Need help?

Do you have a question about the KAM DMX STAR CLUSTER and is the answer not in the manual?

Summary

Unit uses diode lasers in green and red colour (CLASS 3B). Avoid exposure to eyes. Never open the laser diode box.

Describes the laser beam effect, patterns, colours, and reflection angle of the DMX CLUSTER unit.

Explains DMX input/output, sound activation, and power switch connections for the unit.

Instructions for mounting, securing, and connecting the laser unit to the mains supply. Unit must be earthed.

Details rated voltage, frequency, power consumption, laser wavelength, source, and DMX channels.

Details DMX-512 signal control channels, modes, address switch settings, and wiring.

Specifies the wiring for DMX cables using male XLR to female XLR connectors.

Notes on using master and slave modes, and limitations on controller use in this mode.

General