KAM KMD14.2 - Page 8

Specifications
Model KMD14.2 KMD14.2A KMD16.2.2A
Nett weight 5.9Kg 9.6Kg 11.45Kg
Dimensions (+/-3mm) 412 x 400 x 134mm 412 x 400 x 134mm 624 x 458 x 136mm
Power supply AC100V-240V 50/60Hz AC100V-240V 50/60Hz AC100V-240V 50/60Hz
Packing size(WxDxH) 560 x 520 x 190mm 560 x 520 x 190mm 770 x 570 x 190mm
Mono input
Channels 6 mono 6 mono 12 mono
Mic input Electronically balanced Electronically balanced Electronically balanced
Frequency response 20Hz to 20KHz ±2dB 20Hz to 20KHz ±2dB 20Hz to 20KHz ±2dB
Distortion (THD&N) 0.1% at +4dBu 20Hz-20KHz 0.1% at +4dBu 20Hz-20KHz 0.1% at +4dBu 20Hz-20KHz
Gain range 44dB 44dB 44dB
Line input Electronically balanced Electronically balanced Electronically balanced
Channel fader range +10dB to -60dB +10dB to -60dB +10dB to -60dB
S/N 64dB 64dB 64dB
EQ Low 80KHz ±15dB 80KHz ±15dB 80KHz ±15dB
EQ Mid 100Hz -8KHz ±15dB 100Hz -8KHz ±15dB 100Hz -8KHz ±15dB
EQ High 12KHz ±15dB 12KHz ±15dB 12KHz ±15dB
EQ Lo cut filter -3dB at 75Hz 18dB/OCT -3dB at 75Hz 18dB/OCT -3dB at 75Hz 18dB/OCT
Stereo input
Channels 4 stereo 4 stereo 2 stereo
Line input Electronically balanced Electronically balanced Electronically balanced
Frequency response 20Hz - 20KHz ±2dB 20Hz - 20KHz ±2dB 20Hz - 20KHz ±2dB
Distortion (THD&N 0.1%at +4dBu,20Hz -20KHz 0.1%at +4dBu,20Hz -20KHz 0.1%at +4dBu,20Hz -20KHz
Channel fader range +10dB to -60dB +10dB to -60dB +10dB to -60dB
S/N 80dB 80dB 80dB
EQ Low 80Hz ±15dB 80Hz ±15dB 80Hz ±15dB
EQ Low Mid 500Hz ±15dB 500Hz ±15dB 500Hz ±15dB
EQ Hi Mid 3KHz ±15dB 3KHz ±15dB 3KHz ±15dB
EQ High 12KHz ±15dB 12KHz ±15dB 12KHz ±15dB
Main mix max output +22 dB balanced +22 dB balanced +22 dB balanced
Aux send max output +22 dB unbalanced +22 dB unbalanced +22 dB unbalanced
Control room output +22 dB unbalanced +22 dB unbalanced +22 dB unbalanced
Residual output noise -100dBu (Main output) -100dBu (Main output) -100dBu (Main output)
Power consumption 30w for mixer 30w for mixer & max 1200W (amp) 38w (mixer) & max 1200W (amp)
Output power (stereo) Not applicable 1100w + 1100w @ 4 Ohms 1100w + 1100w @ 4 Ohms
Not applicable 550w RMS + 550w RMS @ 4 Ohms 550w RMS + 550w RMS @ 4 Ohms
Not applicable 300w RMS + 300w RMS @ 8 Ohms 300w RMS + 300w RMS @ 8 Ohms
Frequency range Not applicable 20Hz-20Khz - 0.5dB 20Hz-20Khz - 0.5dB
S/N ratio Not applicable 100dB 100dB
Distortion (typical) Not applicable Less than 0.03% Less than 0.03%
Distortion (SMPTE) Not applicable Less than 0.04% Less than 0.04%
Damping factor Not applicable 280 (5Hz-1KHz) 280 (5Hz-1KHz)
Crosstalk@8Ohms Not applicable A-B 80dB, B-A 80dB A-B 80dB, B-A 80dB