KAMA KM376QC User Manual

4.3 Check engine during the running
Make sure there is no abnormal case during the running referring to following
items.
1. Whether the color of the exhaust gas is normal or not.
If the engine exhausts black smoke continuously, stop to check it at once. If ignore
this symptom, it leads to engine run in a bad condition.
It will shorten the service life of the engine under the overload.
2. The abnormal working sound during the running
If there is abnormal working sound during the running, stop the engine right away.
If you continue to run the engine, it will result in serious damage accidents.
Check all the bolts and nuts if loosened or not. Find out the reason of the fault and
eliminate the trouble.
3. Avoid running the engine in the resonance range
Due to the intrinsic structure factor, the working machinery may resonate this
product in certain rotary speed range. It will make the vibration of the engine
become very incredible. So avoid running the engine near this rotary speed. If
continue to run the engine at this case, it will result in serious damage accidents.
4. A. Add the cooling water to the cooling water tank
Inspect the cooling water whether is enough or not during the running. And
supply the cooling water to the water tank in time.
B. Check the amount of the cooling water at the export hole whether reduced
or not.
If the exported cooling water decreases, stop to check the engine.
C. Check the cooled water whether injected or leaked?
If there is an abnormal case, stop to check the engine right away.
If continue to run the engine lacking of the cooled water, it will cause the
engine over hot to burn out the inside parts.
5. Check the oil pressure lamp whether is on and the oil pressure sign is red
If the oil pressure sign is red, stop to check the engine.
If continue to run the engine at the no-oil state it will result in burning out the inside
parts.
6. Check the charging indication lamp is on.
If the charging indication lamp is on, it indicates that you can't charge the battery.
7. If there is burn or funk or smoke, please add the lubricating oil in time. You must
stop the engine when add the lubricating oil. If there is an abnormal case, but you
can't determine the reason, stop the engine and send to the dealer's shop to
Remark
System
Check and Service items
Periodically check interval
Per300 hrsPer100 hrs Per200 hrs
Replace engine oil in the sump
Clean or replace cleaner element
Check the initial pressure of the fuel injector
Check atomization quality
Clean or replace fuel cleaner element
Check the VE pump
Replace the cooling water
Clean the thermoregulator
Check the tension of fan bolt
Clean the air cleaner element
Clean dust from the inlet pipe
Check the clearance of the exhaust and inlet valve
Check the phase of gas mixed
Check the tightness of the bolt In the cylinder
Check the battery voltage and density of the electrolyte
Check the connection condition of every contact spot.
Clean the dirt on the surface of air compressor
Clean the dirt from impeller and engine inner surface
Check the inner rotator
Turbo- charger Lubricating Fuel Cooling
Water
Air inlet pipe
& Air cleaner
Inlet and
exhaust air
Bolts and cylinder cap Electric
Starter
It's an additional
item for the
KM376ZQC
Send the VE
pump to service
station for
checking
If the antifreeze
is added to water,
check the antifreeze
if sufficient.
Note: " " Indicates that it's a necessary item or content

KAMA KM376QC Specifications

General

Brand	KAMA
Model	KM376QC
Category	Engine
Language	English