5511-710 GB/12.2004/Rev. C1
3
1. Technical description M-Bus
Introduction
This document describes the use of Kamstrup’s
M-Bus system.
M-Bus is used for electronic reading of district heat
meters.
As the data route from meter to accounting
program is electronic, the data is secured against
errors. It is easy and simple to equip Kamstrup
energy meters with an M-Bus Slave, which is
inserted at the modular space in the energy meter.
It is unnecessary to program the integrating energy
meter or the M-Bus Slave as the system is self-
configuring.
Computer placed
at the utility
M-Bus Master
Heat meters with
M-Bus Slave
To Next Page
Loading...
