Kamstrup READy Mini Concentrator - Configuration Within 20 M of the Meters that You Intend to Read; For Ethernet and GSM; For Wi-Fi Installation; Configuration more than 20 M from the Meters that You Intend to Read

To Next Page

To Previous Page

Installation and operation guide

Kamstrup A/S • 55122428_A3_GB_04.201912

3.4.1 Conﬁguration within 20 m of the meters that you intend to read

3.4.1.1 For Ethernet and GSM

1. Insert SIM card or Ethernet cable.

2. Connect the power adapter – all LEDs on the

front turn on solidly for 30 seconds.

3. The power LED blinks for 4-5 minutes. When

the power and dot LEDs are solidly on, the

installation is complete.

Ensure that you can see READy Mini Concen-

trator on check.kamstrup.com. Note the time of

the reading.

Concentrator can be read

Last read 12-07-2018 02:00

See connected devices

Tes t the new device

3.4.1.2 For Wi-Fi installation

See the conﬁguration steps for installations where the READy Mini Concentrator is more

than 20 m away from the meter(s)/sensor(s) that you intend to read. See section 3.4.2 for

further information.

3.4.2 Conﬁguration more than 20 m from the meters that you intend to read

1. When the power and dot LEDs are solidly on, the

conﬁguration can begin. This may take up to 5

minutes.

2. Press the top button on READy Mini Concentrator

(the Wi-Fi LED turns on solidly).