EasyManua.ls Logo

Kamstrup READy Mini Concentrator - 6 Storage; 7 Disposal; Disposal by Kamstrup A;S; The Customer Sends for Disposal

Kamstrup READy Mini Concentrator
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and operation guide
Kamstrup A/S • 55122428_A3_GB_04.2019 17
6 Storage
READy Mini Concentrator must be stored under the following conditions:
IP class 20
Relative humidity: 5 % - 85 %, non-condensing
Recommended storage temperature: 15 °C to 30 °C
7 Disposal
Dispose of the product correctly.
When disposing of the product, remember to cancel the data subscription
associated with the SIM card.
Kamstrup A/S holds an environmental certification according to ISO 14001 and as part of
our environmental policy, we use materials that can be disposed of in an environmentally
sustainable manner to the greatest extent possible. Ensure correct disposal of all parts of
the device. The enclosure must be disassembled to dispose of the batteries, electronics
and enclosure correctly.
7.1 Disposal by Kamstrup A/S
Kamstrup A/S accepts READy Mini Concentrator by the end of operation for
environmentally correct disposal according to previous agreement. The disposal is free of
charge to the customer, except for the cost of transportation to Kamstrup A/S.
7.2 The customer sends for disposal
Hand in the complete READy Mini Concentrator for approved national/local disposal.
Enclose a copy of this page to inform the recipient of the contents.
7.3 Disposal by the customer himself
For disposal of READy Mini Concentrator, see table below.
Any questions about environmental conditions can be directed to:
Kamstrup A/S
Att.: Miljø- og kvalitetsafd.
Fax.: +45 89 93 10 01
info@kamstrup.dk
Topic Material information Recommended disposal
Printed circuit board Coppered epoxy laminate, components soldered on PCB scrap for metal recovery
Plastic enclosure PPS Plastic recovery
Power adapter Electronic waste
Cardboard packaging Cardboard recycling
Plastic insert in packaging PPS Plastic recovery
Table 1 - Disposal table