K&H Total E-Call - User Manual

Total E-Call
Up
On / Off
Backlight
Down
Left / Vol -
Exit Menu
Right / Vol +
Menu / Select
Call Cartridge
Compartment
Reset Button
MULTI
PLAY RPT
MENU
i RMP


Gobble
Purr
Yelp
Cutt
Battery
Location
AAA X 3
Remote
Call Button
Play / Stop
I. Familiarization
II. Main Screen
Press and hold the On / Off button to turn the Total E-Call on. See Figure A.
All the calls on your cartridge will be listed in the Play Window. Use the Up or Down Arrow
Buttons to scroll through all the available calls.
Adjust the Volume Up or Down using the Vol - and Vol + Buttons. The Total E-Call is in
Single Call Mode as long as PLAY is the only option highlighted on the menu. To play a
single call, scroll Up or Down, Select the desired call and press the Thumb / Play Button on
the right side of the Total E-Call. The default configuration will play this call one time.
Your Total E-Call will power off after about 3 minutes of inactive use. You must push and
hold the On button to reactivate it. NOTE: This setting is disabled when the Remote
feature has been turned On.
The Total E-Call can quickly and easily be reset to factory settings. To do this, Power the
unit off, remove the call cartridge and depress the Reset Button.
Always power the Total E-Call off before inserting or removing call cartridges.
A B C D
E
F G H I J
A. Multi Play Mode - Displayed when the unit is in Multi-Play mode.
B. Play Mode - Displayed when the unit is in Single Play Mode, Also displayed along with
MULTI when in Multi-Play Mode.
C. Repeat Mode - Single or Multiple calls will be repeated.
D. Menu Mode - Displayed when the unit is in a main menu.
E. Play Window - Shows all current calls on card or in Multi-Play List.
F. Individual Volume - Allows each call in Multi-Play mode to have a separate volume.
G. Ramp Mode - When the Ramp mode is turned on the activated call will start 3 volume
levels below the currently selected play volume. This feature works in both single play
and multi-play mode. In multi-play mode, only the first call in the sequence will ramp up.
H. Volume Bar - Shows current volume on each call.
I. Remote Mode - Displayed when the unit has been configured for use with the optional remote.
J. Backlight - Displayed when the Backlight feature has been turned on.
III. Using your Total E-Call
MULTI
PLAY
RPT
MENU
i
RMP


Call 4
Call 3
Call 2
Call 1
Instructions
Thumb Button
Play / Stop
Figure A
Speaker
Jack
MULTI
PLAY RPT
MENU
i RMP


Gobble
Purr
Yelp
Cutt
MULTI
PLAY
RPT
MENU
i
RMP


Ramp
Remote
Repeat
Multi OFF
OFF
OFF
OFF
Figure B
MULTI
PLAY
RPT
MENU
i
RMP


4
3
2
1
Figure C

Summary

Familiarization

Thumb Button Play;Stop

Controls playback and stopping of calls.

Volume and Navigation Buttons

Buttons to adjust audio volume and navigate menus.

Power On;Off Button

Button to turn the device on and off.

Remote Call Button

Using Your Total E-Call

Powering On and Call Selection

Instructions on turning on, scrolling through calls, and selecting.

Volume Adjustment

Automatic Power Off

Factory Reset Procedure

Procedure to reset the unit to factory settings by removing cartridge and pressing reset.

Cartridge Handling

Main Menu and Multi-Play Operation

Main Menu Navigation

How to enter and navigate the Main Menu Screen.

Multi-Play Menu Activation

How to enter the Multi-Play Menu from the Main Menu.

Slot Assignment and Editing

Procedure to activate slots, assign calls, and edit the Multi-Play list.

Individual Volume Settings

How to set and adjust volume for individual calls in Multi-Play.

Playing the Multi-Play List

K&H Total E-Call Specifications

General

Brand	K&H
Model	Total E-Call
Category	Toy
Language	English