Need help?Do you have a question about the K&K Sound Pure Mini and is the answer not in the manual?
Preparation steps for installing the pickup on pinless bridges, including drilling reference holes.
Guidance on testing pickups after removal and cleaning for re-installation.
Diagnosing and resolving issues where the pickup system sounds hollow or weird.
Addressing feedback issues at high volumes, suggesting sound hole covers or different systems.
Explaining impedance mismatch between pickups and preamps, and how to compensate.
Resolving phase issues, suggesting a preamp with a phase switch for better volume.
Troubleshooting intermittent or non-working pickups, often related to endpin jack connection.
Diagnosing low output on specific strings, usually due to installation or glue coverage.
Solutions for pickup jacks that are too short for certain vintage guitar endblocks.
General| Type | Pickup |
|---|---|
| Compatibility | Acoustic Guitars |
| Impedance | High impedance |
| Mounting | Internal |
| Output | 1/4 inch jack |
| Features | No battery required |
| Application | Acoustic guitar amplification |
| Technology | Passive |
To Next Page
