. The ‘Tip-light’ is used to see around the area of the
leak when in a dark environment.
. When this instrument is used in noisy environments,
look at the red LED which flashes more rapidly as the
tic rate increases. The optional earphone can be
plugged into the unit’s side if there is high
background noise or the operator does not want to
disturb other people. This also disables the speaker.
. If the tic rate becomes uncontrollable, it may be
necessary to change the sensor.
. The detector will respond to some leak finding
solution (e.g. Soap), so please use your detector first.
If over exposed to some gases, the detector may take
an extended period of time to return to normal.
Battery Replacement
. Remove the battery case cover.
. Replace the 9V alkaline battery. An alkaline battery
should always be used. Ensure the polarity of the
battery matches that shown in the compartment.
. Replace battery case cover.
Downloaded from Elcodis.com electronic components distributor
To Next Page
Loading...
Need help?
General