Kane CD100A User Manual

6
ELECTROMAGNETIC
COMPATIBILITY
T
he European Council Directive 89/336/EEC requires that
e
lectronic equipment does not generate electromagnetic
d
isturbances that exceed defined levels and has an adequate
l
evel of immunity to enable it to be operated as intended.
T
he specific standards applicable to this product are detailed
i
n the appendices.
S
ince there are many electrical products in use that pre-date
t
his Directive and may emit electromagnetic radiation in
e
xcess of the standards defined in the Directive there may be
o
ccasions where it would be appropriate to check the
a
nalyser prior to use. The following procedure should be
a
dopted:
•
Go through the normal start up sequence in the location
where the equipment is to be used.
•
Switch on all localised electrical equipment that might be
capable of causing interference.
•
Check that all performance are as expected. (A level of
disturbance in the performance is acceptable). If not
adjust the position of the instrument to minimise
interference or switch off, if possible, the offending
equipment for the duration of the test.
Downloaded from Elcodis.com electronic components distributor

Kane CD100A Specifications

General

Brand	Kane
Model	CD100A
Category	Gas Detectors
Language	English