Page 7
CLEANING
The outer case and protective boot (if applicable) can be cleaned using a damp cloth and
non abrasive detergent. After cleaning leave the product in a warm dry place until the
surfaces are completely dry. Under no circumstance use solvent or hydrocarbon based
products as they can cause serious damage to plastic and rubber.
SERVICING
This product contains no user serviceable parts.
SAFETY
This product has been tested for compliance with EN 61010-1:2010 (Safety requirements for
electrical equipment for measurement, control and laboratory use.) and is certified to be
compliant.
END OF LIFE PRODUCT DISPOSAL
At the end of the product's life it should be re-cycled in accordance with current legislation
and local guidelines.
BATTERY DISPOSAL
Always dispose of depleted batteries using approved disposal methods that protect the
environment.
To Next Page
Loading...